Guest Information

This machine uses Smart Inverter technology to optimize energy use and motions based on fabric type.

1. Daily Washing Steps

• Power On: Press the Power button.
• Load: Place larger, heavier items at the bottom. Do not pack too tightly.
• Detergent: Add detergent to the dispenser. The "Side Waterfall" feature helps reduce residue.
• Select a Cycle: Use the dial for Normal (Standard) or Quick Wash (Lightly soiled).
• Start: Press the Start/Pause button.

2. Key Features

• Punch+3: Creates vertical water thrusts for even washing.
• Auto Restart: Resumes automatically if power is interrupted.
• Child Lock: Can be activated to prevent setting changes during a cycle.

1. Quick Start Guide

1. Place up to 8kg of wet laundry into the drum.
2. Turn the dial to one of the 15 drying programs.
3. Press the Start/Pause button.

2. Critical Maintenance (Required After Every Cycle)

• A. Clear the Lint Filter: Pull the filter from the door rim, wipe away all lint. This is essential for fire safety.
• B. Empty the Water Tank: Pull the top drawer out and pour the collected water into the sink.

1. Using the Cooktop

• Gas Burners: Push knob in and turn to the large flame symbol. Press ignition. Hold for 10 seconds to engage safety valve.
• Electric Hotplate: Rotate knob (1–6). Position 5-6 is for rapid heating.

2. Oven & Grill

Open door fully. Push/Turn knob to temperature. For Baking, place match at floor ignition hole and hold for 10 seconds.

3. Temperature Reference

Use front buttons for power and speed (Low, Medium, High). Extraction is recommended for heavy frying.

Safety Note

Never cook with open flames under the hood without a pan, as suction can pull flames into the grease filters.

• Power: Toggle on/off.
• Mode: Select Snowflake symbol for Cooling.
• Jet Cool: Rapid 30-minute cooling.
• C/F Switch: Hold Temp (▲/▼) for 5 seconds to toggle Celsius/Fahrenheit.

1. Safety Test

Turn switch ON outside bathroom. Press TEST (LED turns off), then RESET (LED turns on) to ensure safety.

2. Operation

Ensure water is flowing. Rotate bottom knob toward HIGH for heat. Use top knob if pressure is low.